| Customization: | Available |
|---|---|
| Bonding Function: | Structural Adhesive |
| Morphology: | Solid-State |
|
Still deciding? Get samples of US$ 0/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| product name | Edge banding hot melt glue/adhesive |
| feature |
Good melting properties No stringing High green strength Good thermal stability Good wetting properties |
| Application temperature | 190-200°C |
| Coating speed | 10-25m/min |
| Suggestion | 1. Not mixed with any other type of adhesive. 2. The cover of glue tank should be closed lest the adhesive might be polluted. 3. If the plant line stops for over 2 hours, The glue temperature should be tuned down |
| Storage |
1.24 months in its original package at an average temperature of 25°C or below 2. Keep containers closed 3. temperature should not exceed 35°C |
| Safety |
Keep plant ventilative and forbid any fire
|
| Coating weight | 40-100g/M2 |
Attention:
The HM adhesives should be used on any type of continuous edge banding machine.
Coating can be made either on the edge or on the section material.
The coated material is immediately placed in contact with the substrate and pressed with rolls.
(The temperature should be checked directly in the gluing system)
The supports and edges must be at ambient temperature(which should not be less than 15°C)
and the level of humidity should not exceed 10% in order to obtain a good bond.
APPLICATION
Hot-melted adhesive, designed for Edge-banding application
PROPERTIES
Good melting properties
No stringing
High green strength
Good thermal stability
Good wetting properties
CONDITION
The HM adhesives should be used on any type of continuous edge banding machine.
Coating can be made either on the edge or on the section material.
The coated material is immediately placed in contact with the substrate and pressed with rolls.
Application temperature: 190-200°C
(The temperature should be checked directly in the gluing system)
Coating weight: 40-100g/M2 (Depending on edges nature and substrate)
Coating speed: 10-25m/min
The supports and edges must be at ambient temperature(which should not be less than 15°C)
and the level of humidity should not exceed 10% in order to obtain a good bond.
SUGGESTION
1 should not be mixed with any other type of adhesive.
2.The cover of glue tank should be closed lest the adhesive might be polluted.
3.If the plant line stops for over 2 hours,The glue temperature should be tuned down
SAFETY
1.Wear goggles and adiabatic gloves when filling hopper or pot.
2.Keep plant ventilative and forbid any fire.
3.Consult MSDS and read "cautions" before used
STORAGE
24 months in its original package at an average temperature of 25°C or below. Store in a
clean, dry area. Keep containers closed. Storage temperature should not exceed 35°C
APPEARANCE
Hotmelt Adhesive for Edge-banding application
PRODUCTION LINE
QUALITY TEST
PACKAGE: 25KG/BAG
Our Factory
Q1: How quick can we get the samples?
A: Samples can be sent within 3 days by International Express FedEx, DHL, TNT or UPS according to customer's requirement.
Q2: Can we place an order below 1000 kgs?
A: of course yes, we accept an order below 1000 kgs as a trial order for developing potential market .
Q3: Can we make special packaging for products?
A: Yes, we have blank packaging available without our logo and specially labeling on packaging base upon customer's specific requirement.
Q4: How can we visit your factory?
A: Our factory location is very closed to Shanghai Hongqiao airport, just 15 minutes driving . We can arrange to pick you up whenever you plan to visit.
){kind=link}