Water Based Membrane Press Glue

• Customization: Available
• Transport Package: Packed in Plastic or Iron Barrel
• Specification: 30 or 200kg or 1000kg/barrel
• Model NO.: lj
• Trademark: ROCK
• Origin: Shanghai
• Production Capacity: 6000 Tons/Month
• Package Size: 35.00cm * 35.00cm * 40.00cm
• Package Gross Weight: 20.000kg

Product Description

Product Description

Product Description

 

 Membrane press adhesive is used for vacuum forming products like vacuum forming door, kitchen cabinet panel, sound box panel, computer desk etc. It has excellent performance on heat resistant, fast drying, small partical diameter, endurance bonding strength and atomization.

Item	Content
Brand	Rock
Product name	Membrane press adhesive
Type	Water base adhesive
Main component	WPU(water polyurethane)
Apperance	White emulsion
Classification	Single component, if want to increase the heat resistance, can add 2%~5% hardener
Operation temperature	15ºCmin
Operation mode	Spray the adhesive on the based materials such as wood door, then put it into the vacuum forming machine, heat the decorative PVC film, finally do the membrane press

Application

Membrane press adhesive is applied in vacuum membrane press machine for making membrane pressing worktops. It is used for vacuum covering wooden boards like fiber board, particle board, timber, plywood, MDF with hard or soft thermoplastic films like PVC, TPE, PETG.



Operation Procedure
 

No.	Content
1	Spray the glue to the part of wood that needs wrapping, until a white layer of glue appears on the surface;
2	After the glue dries naturally, i.e. the white glue becomes transparent and no fingerprint is left after pressed by fingers, the wood can be put into the vacuum suction machine;
3	Use the vacuum suction machine to wrap the wood. Due to the different specification of the machine and heat resistance of PVC films, the heating temperature shown on the vacuum suction machine varies a lot, but it should subject to the temperature of the wood which is between 50~60ºC;
4	The forming process in the vacuum suction machine includes 6 steps: preheating, heating, vacuum pressing, stop heating, stop vacuum pressing, natural cooling.

Packaging & Shipping


In terms of packaging, if the order is less than one container, membrane press adhesive is usally packed in plastic barrel, which is 30kg/barrel; if the order is in full container, it is usally packed in iron barrel, which is 200kg or 1000kg/barrel. The packaging ways, materials, patterns can be customizable.
In terms of shipping, for large quantity, it usually goes by sea and can be delivered within 30 days; for samples, it normally goes by air and can be delivered within 7 days. The normal shipping port is Shanghai. If need, can ship from other ports.
 
Quality Control


Shanghai Rocky Adhesives Co.,Ltd. has passed the certification of ISO9001:2008 quality management system and has formulated HSE Standard management system(healthy, safe, eco-friendly). Its water based and hot melt adhesives were tested and identified by authentication and ITS, which are accordant with contents of 58 kinds of SHVC specified by European Chemicals Agency, REACH regulation and RoHS and do not contain phthalic ester, heavy metal, toxic substances and substances harmful to the ozone layer etc.

We, Shanghai Rocky Adhesives Co.,Ltd, starts the production of adhesives since 1995. Up to now, we own two factories with advanced production equipment and detection instrument. The Shanghai factory has a workshop of more than 10,000 square meters with annual productivity of 20,000 tons. The Chengdu factory has a workshop of more than 30,000 square meters with annual productivity of 50,000 tons of adhesives. Rocky is one of the most largest production bases of high grade hot melt adhesives and water based adhesives. Its customers can be found in 31 provinces around China. Meanwhile, its products have been exported to Russia, Southeast Asia, South Asia, Middle East, South America, etc.


FAQ
 Q1: How quick can we get the samples?
A: Samples can be sent within 3 days by International Express FedEx, DHL, TNT or UPS according to customer's requirement.
Q2: Can we place an order below 1000 kgs?
A: of course yes, we accept an order below 1000 kgs as a trial order for developing potential market for customers.
Q3: Can we make special packaging for products?
A: Yes, we have blank packaging available without our logo and specially labeling on packaging base upon customer's specific requirement.
Q4: How can we visit your factory?
A: Our factory location is very closed to Shanghai Hongqiao airport, just 15 minutes driving from airport to factory. We can arrange to pick you up whenever you plan to visit.
We are looking distributors around the world, if interest, welcome to contact us for details!