Edge Banding Sealing Hot Melt Glue for Plywood with Middle Temperature

• Bonding Function: High Temperature Resistant Adhesive
• Morphology: Solvent
• Application: Woodworking
• Material: Polyurethane
• Classification: Hot Melt
• Main Agent Composition: EVA
• Model NO.: RY8126
• Characteristic: Weatherability
• Promoter Composition: Solvent
• Composition: Organic Material
• Color: Yellow
• Soft Point(ºC): 92-110
• Appearance: Light Granule(with Several Colors)
• Solid Content: 100%
• Viscosity@200ºC: 40000-90000cps
• Transport Package: 25kg/Bag
• Specification: 10/25kg/bag
• Trademark: Rocky
• Origin: Shanghai, China
• Production Capacity: 20000 Ton/Tons Per Year

Product Description

Edge Banding Sealing Hot Melt Glue for Plywood with Middle Temperature

Product Description

Hot-melted adhesive	PROPERTIES
	Good melting properties
	No stringing
	High green strength
	Good thermal stability,  Good wetting properties

 The white or yellow glue that carpenters use for gluing joints and laminating is also suitable for attaching edge beading, but it is slightly more troublesome to use than contact cement. It has a tendency to run when it is wet, so the beading should be applied immediately after application of the glue. Moreover, it takes about an hour to dry, so you need to hold the beading in place with tape. There is one advantage to using carpenter's glue. Until it sets, the beading is moveable, so you can make small adjustments if needed.

APPLICATION  

Hot melt adhesive Suitable for the coating of melamine, PVC, solid wood and other materials The performance of the adhesive wetting material is good, high viscosity, good thermal stability, good fluidity, no wire drawing, etc. OPERATION INSTRUCTION      Machine: Suitable for all types of automatic edge sealing machine, coating machine. Ambient temperature: ≥15 ° C Material temperature: ≥15ºC Material moisture content: ≤10% Temperature of glue roller: coating (160-200ºC); Feed speed: ≥10m/min It should not be mixed with any other type of adhesive; The cover of glue tank should be closed to avoid pollution; Since hot melt adhesive must be heated when used, personal protective equipment should be worn; Recommended "first-in-first-use" cycle use; STORAGE Can be stored 24 months in a clean dry place, in its original package at an average temperature of 25ºC or below.

TECHNICAL PROPERTIES Appearance Light yellow granules Viscosity: 1700-3700CPS@180ºC  Softening point: About 95ºC-110ºC PACKAGING 25Kg/bag SAFETY MSDS should be consulted for proper handling before use. Wear safety gloves and goggles when handling molten adhesive

If you have any questions, please feel free for contact with us!