Super Adhesives Hot Melt Glue for Edge Banding Manufacturer in China

• Bonding Function: High Temperature Resistant Adhesive
• Morphology: Solid-State
• Application: Woodworking
• Material: Rub
• Classification: Hot Melt
• Main Agent Composition: EVA
• Model NO.: RY66201B
• Characteristic: Weatherability
• Promoter Composition: Solvent
• Composition: Organic Material
• Color: Yellow
• Appearance: Light Granule
• Solid Content: 100%
• Transport Package: 25kg/Bag
• Specification: 25kg/BAG
• Trademark: rocky
• Origin: China
• Production Capacity: 20000 Tons Per Year

Product Description

Hot melt adhesive for EVA using by gluing machine

Our labelling adhesives provide exceptional adhesion and are ideal for labelling chilled and ambient products. Combining high molten tack with long open times, they also perform perfectly with wet glass and PET cold-filled bottles. In addition, PET bottles that expand after being filled with carbonated drinks can be labelled with confidence. Here, our adhesives either slip to accommodate expansion whilst securely adhering the label or they allow the label to stretch (OPP labels) to avoid unsightly sticky glue lines. We also manufacture adhesives for shrinkable plastic bottles that allow labels to be safely heat shrunk after application.
Our adhesive formulations for labelling are suitable for wet and cold bottles on both reel and magazine-fed systems, or hot and dry cans and jars to 85°C. These can typically contain preserves, vegetables, fruit, pet foods and other products that are cooked or sterilised in their containers prior to labelling. Spray application adhesives meanwhile allow labels to be applied to over 1,000 containers per minute, whilst keeping machines clean and free from stringing and overspray. This is in addition to the consumption savings and other benefits provided.
Product Descriptio
APPLICATION  
Hot-melted adhesive, designed for Edge-banding applicationPROPERTIES  
CONDITION
The HM adhesives should be used on any type of continuous edge banding machine.
Coating can be made either on the edge or on the section material.
The coated material is immediately placed in contact with the substrate and pressed with rolls.
Application temperature: 190-200°C
(The temperature should be checked directly in the gluing system)
Coating weight: 40-100g/M2 (Depending on edges nature and substrate)
Coating speed: 10-25m/min
The supports and edges must be at ambient temperature(which should not be less than 15°C)
and the level of humidity should not exceed 10% in order to obtain a good bond.
SUGGESTION
1 should not be mixed with any other type of adhesive.
2.The cover of glue tank should be closed lest the adhesive might be polluted.
3.If the plant line stops for over 2 hours,The glue temperature should be tuned down .
SAFETY
1.Wear goggles and adiabatic gloves when filling hopper or pot.
2.Keep plant ventilative and forbid any fire.
3.Consult MSDS and read "cautions" before used
STORAGE
24 months in its original package at an average temperature of 25°C or below. Store in a
clean, dry area. Keep containers closed. Storage temperature should not exceed 35°C.
If you have any questions, please feel free for contact with us!