High Quality Low MOQ EVA Glue Edge Banding Furniture Hot Melt Adhesive

• Customization: Available
• Bonding Function: High Temperature Resistant Adhesive
• Morphology: Solid-State
• Model NO.: RY66201B
• Material: Rub
• Classification: Hot Melt
• Main Agent Composition: EVA
• Characteristic: Weatherability
• Promoter Composition: Solvent
• Composition: Organic Material
• Color: Yellow
• Appearance: Light Granule
• Solid Content: 100%
• Color 1: White
• Color 2: Yellow
• Transport Package: 25kg/Bag
• Specification: 25kg/BAG
• Trademark: rocky
• Origin: China
• Production Capacity: 20000 Tons Per Year
• Package Size: 35.00cm * 27.00cm * 30.00cm
• Package Gross Weight: 21.000kg

Product Description

Hot melt adhesive for EVA using by gluing machine
 

Used for edge sealing on particleboard or MDF board with various materials.

The adhesive wetting material has the advantages of good performance, high initial viscosity, good thermal stability, good fluidity, no wire drawing, no glue line and so on.

OPERATION INSTRUCTION
    
Machine: Suitable for all kinds of automatic edge banding machine
Ambient temperature: ≥15ºC
Material temperature: ≥15ºC
Glue roller temperature: 195-210ºC;
Tank temperature:190-200ºC
Pressure: 3-5kg/cm2
Feed speed: >10m/min; 
 

Appearance

 

Nature color granules

Viscosity:

60000-110000CPS@180ºC 


Softening point:

About 95-115ºC

 

Product Description

 

APPLICATION  
Hot-melted adhesive, designed for Edge-banding applicationPROPERTIES  
CONDITION
The HM adhesives should be used on any type of continuous edge banding machine.
Coating can be made either on the edge or on the section material.
The coated material is immediately placed in contact with the substrate and pressed with rolls.
Application temperature: 190-200°C
(The temperature should be checked directly in the gluing system)
Coating weight: 40-100g/M2 (Depending on edges nature and substrate)
Coating speed: 10-25m/min
The supports and edges must be at ambient temperature(which should not be less than 15°C)
and the level of humidity should not exceed 10% in order to obtain a good bond.
SUGGESTION
1 should not be mixed with any other type of adhesive.
2.The cover of glue tank should be closed lest the adhesive might be polluted.
3.If the plant line stops for over 2 hours,The glue temperature should be tuned down .
SAFETY
1.Wear goggles and adiabatic gloves when filling hopper or pot.
2.Keep plant ventilative and forbid any fire.
3.Consult MSDS and read "cautions" before used
STORAGE
24 months in its original package at an average temperature of 25°C or below. Store in a
clean, dry area. Keep containers closed. Storage temperature should not exceed 35°C.
If you have any questions, please feel free for contact with us!

Certifications

 

Detailed Photos